Honda 2002 Accord Manual page 142

Engine Assembly
Engine Installation (cont'd)
44. Clean the battery posts and cable terminals w i t h
sandpaper, then assemble t h e m and apply grease
t o prevent corrosion.
45. Refill the engine w i t h engine oil (see page 8-5).
46. Refill the transmission w i t h MTF (see page 13-3) or
ATF (see page 14-113).
47. Refill the radiator w i t h engine coolant, and bleed
air f r o m the cooling system w i t h the heater valve
o p e n (see page 10-10).
48. M o v e the shift lever to each gear, and verify that
the A/T gear position indicator f o l l o w s the
t r a n s m i s s i o n range switch (A/T).
49. Check that the transmission shifts into gear
s m o o t h l y (M/T).
50. Inspect for fuel leaks. Turn ON (II) the ignition
switch (do not operate the starter) so that the fuel
p u m p runs for approximately 2 seconds and
pressurizes the fuel line. Repeat this operation t w o
or three times, then check for fuel leakage at any
point in the fuel line.
51. Enter the anti-theft code for the radio, then enter
the customer's radio station presets.
5-18