Table of Contents
Advertisement
Front Passenger's Airbag:
5. Remove the glove box, then disconnect the 4P
connector between the front passenger's airbag (A)
and S R S main harness (B).
B
Side Airbag:
6. Disconnect the 2P connector between the side
airbag (A) and the S R S floor harness (B) or side
wire harness (B).
7. Cut off the airbag connector, strip the ends of the
airbag wires, and connect the deployment tool
alligator clips (A) to the airbag. Place the
deployment tool at least 30 feet (10 meters) away
from the airbag.
NOTE: The front passenger's airbag has 4 wires, 2
yellow and 2 red. Twist each pair of unlike color
wires together, and connect one alligator clip to
each pair.
A
(cont'd)
23-285
Advertisement
Table of Contents
Troubleshooting
