Configuring Video Overlay; Configuring The Save Path - Honeywell HRHT4041 Remote User Manual

Configuring Video Overlay

Figure 3-4 Video Overlay Configurations
Table 3-4 Video Overlay Configurations
Setting
Cover-Area
Channel Display
Time Display

Configuring the Save Path

Configure the save path for snapped images (click
video (click in the preview interface).
Description
1. Select Preview or Record.
2. Click Set, then draw a privacy mask on the specified video
in preview or on monitor video.
The DVR system supports a maximum of four privacy zones.
Enable this function so that the system overlays channel
information in the video window.
Use the mouse to drag the channel display into position.
You can see the channel on the live WEB video or the
playback video.
Enable this function so that the system overlays time
information in the video window.
Use the mouse to drag the time display into position.
You can see the time on the live WEB video or the playback
video.
in the preview interface) or recorded
Configuration | 39
800-22740 - A - 02-2017