Logging On; Setting The Database With View; Figure 15-6 The View Logon Window - Honeywell Rapid Eye System Administration Manual

Logging On

TIP!

Setting the Database with View

Leave this
checkbox empty
on a mobile PC
TIP!
Document 800-07769 Rev A
02/11
For Routine Use of Admin
After specifying a database, Admin and View will continue to use it, each time that you log
on. Logging on to Admin is a simple matter of starting Admin and clicking OK (as explained
in on page 262).
Starting Admin
To log on to Admin, use either:
• The Administrator account, or
• An account in which user rights and site access are based on the Administrator.
The First Use Exception
On first use, you are offered an empty, default Multi-Media database. To obtain a
Multi-Media central database, see
Figure 15-6 The View Logon Window
The First Time That You Use View
The View operator needs to set View to use a Multi-Media central database.
For mobile PCs that will not have access to the Multi-Media database, have the Multi
SA connect the PC to the Multi-Media database at least once, and have that user log
on.
When a different Multi-Media database is used at View's logon, the local database is
overwritten with contents from the most recent Multi-Media database.
Rapid Eye DVR System Administrator Guide
Obtaining a Multi-Media Database
on page 262.
273