Checking The Live Video From Cameras; Checking The Playback Of Recorded Video; Checking The Panning, Tilting, And Zooming - Honeywell MAXPRO NVR Hybrid XE Installation And Configuration Manual

MAXPRO NVR 5.6 Installation and Configuration Guide
When an alarm is triggered it appears in the Alarm window. You can click the Alarm tab to
view the Alarm window. The state of the alarm after it is triggered is referred to as
unacknowledged. You can view the list of all the unacknowledged alarms in a table in the
Alarm window.
Getting to Know the MAXPRO NVR User Interface
See the
more information on the Alarms.

Checking the Live Video from Cameras

To ensure that all the cameras are connected and functioning properly, you need to check for
live video from them.
To select the cameras and view live video
• Double-click a camera in the Devices window.
Or
You can also drag a camera to a panel in the salvo layout. The panel starts displaying live
video.
You can select multiple cameras and view live video in different panels of the salvo layout.
Getting to Know the MAXPRO NVR User Interface
See the
more information on how to view live video from cameras.

Checking the Playback of Recorded Video

To playback video, the recording from the camera must be available and the recording
settings for the camera must be configured. Recorded video can be played from the Timeline
window.
The following operations can be performed on the recorded video.
• Playing recorded video using the timeline
• Playing recorded video using Mark In and Mark Out points in timeline
• Marking points of interest in the timeline using bookmarks
Refer to the MAXPRO® NVR Operator's Guide
recording settings for the cameras connected to MAXPRO NVR.

Checking the Panning, Tilting, and Zooming

Using the digital PTZ feature in MAXPRO NVR, you can perform panning and tilting on live and
recorded video and clips. The digital PTZ feature when enabled allows you to perform
panning and tilting on the video display that is zoomed or enlarged in a panel.
Refer to the MAXPRO® NVR Operator's Guide
V E R I F Y I N G T H E C O N F I G U R A T I O N
Checking the Live Video from Cameras
section on page
section on page
for more information on how to configure the
for more information on PTZ.
101
for
101
for
241