Saving All Settings - IDK MSD-72 Series User Manual

MSD-72 Series User's Guide

9.13.5 Saving all settings

Top → PRESET MEMORY → SAVE ALL SETTING
Menu
Setting value No.1 to No.8
You can save up to eight preset memories (up to 10 characters) of the following settings:
The setting of this menu is not updated until the MENU/SET key is pressed. Make sure to press the
MENU/SET key to update the setting.
Menu
Selecting input
channels
(P.29)
Setting position, size,
and masking
(P.52)
Quality setting
(P.58)
Input settings
(P.61)
Setting input timing
(P.66)
Output settings
(P.73)
Audio settings
(P.80)
EDID
(P.85)
114
[Table 9.29] Settings can be saved in preset memory
Selecting input channels
Output resolution, Aspect ratio for sink device, Aspect ratio, Aspect ratio control,
Overscan, Display position, Display size, Masking, Background color, Test
pattern
Sharpness, Brightness, Contrast, HUE, Saturation, Black level
No-signal input monitoring, Setting HDCP input, Signal type of analog input,
Automatic detection of input video intertuption, Selecting signal of DVI input
connector, Priority of input channel automatic switching, Masking time after
automatic switching of input channel
The total number of horizontal dots, Start position, Active area, Automatic
measurement of start position,
Automatic setting of input timing, Tracking
Output mode, Synchronous signal output with no input video, Output video with
no input video, Window transaction effect, Window transaction speed, Wipe
color, HDCP, The number of HDCP retries, Deep Color, CEC connection
Output level, Output mute, Input selection, Input level, Lip sync, Sampling
frequency, Audio output connector, Multi channel audio output, Test tone
EDID, Resolution for PCs, Input resolution for AV devices, Deep Color, Audio
format, Speaker configuration
Item