Managing The Digital Light Processing; Stopping Digital Light Processing Communication; Resetting The Digital Light Processing; Running A Digital Light Processing Self Test - Christie CP2208 User Manual

Managing the Digital
Light Processing
Learn how to manage the integrated cinema processor (ICP) electronics.
To access the Digital Light Processing (DLP) menus, you need administrator or service permissions.
Stopping Digital Light Processing
communication
Stop Digital Light Processing (DLP) communication when you perform DLP maintenance.
1. On the touch panel controller (TPC), log on to the projector (on page 22) with administrator or
service permissions.
2. Select Menu > Diagnostics > DLP Management.
3. Select Stop DLP Communication.
4. Select Acknowledge.

Resetting the Digital Light Processing

To remove image artifacts from the screen, try resetting the Digital Light Processing (DLP) before
restarting the projector.
Do not reset the DLP if content is playing.
1. On the touch panel controller (TPC), log on to the projector (on page 22) with administrator or
service permissions.
2. Select Menu > Diagnostics > DLP Management.
3. Select Reset DLP.
4. Select Yes.
5. If an alarm appears, select Acknowledge.

Running a Digital Light Processing self test

Run a Digital Light Processing (DLP) self test to test the functionality of the Integrated Cinema
Processor (ICP) and DLP.
1. On the touch panel controller (TPC), log on to the projector (on page 22) with administrator or
service permissions.
2. Select Menu > Diagnostics > DLP Management.
CP2208 User Guide
020-101916-03 Rev. 1 (12-20120)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
39