Errors - Simrad Maris ECDIS900 Operator's Manual

Errors

The following is a list of errors that can occur during S57 chart management.
Error codes
SSE01, SSE02
SSE03
SSE04
SSE05
SSE06
SSE07
SSE08
SSE09
SSE10
SSE11
SSE12
SSE13
SSE14
SSE15
SSE16
MERR_CHART_TOO_OLD_FOR_PERMIT -29
MERR_CELL_FILE_NOT_AVAILABLE
MERR_CANNOT_CREATE_ZIPFILE
MERR_PKZIP_NOT_FOUND
MERR_CANNOT_RUN_PKZIP
96
E
RRORS
ID Error messages
-1, -2
-3 Certificate is invalid
Format of Certificate is
-4
incorrect
SA Digital Certificate file is
-5
not available
SA Digital Certificate is
-6
invalid
Certificate file is not
-7
available
Format of private key is
-8
invalid
-9 Signature is invalid
Files are different (check
-10
after decryption).
-11 Cell Permit file not found
Cell Permit format is
-12
incorrect
Cell Permit is invalid
-13
(checksum is incorrect).
-14 Incorrect system date
Subscription license has
-15
expired
-16 ENC CRC value is incorrect Corrupted ENC file
Chart is too old for used
permit
-17 Cell file is not available
-18 Decryption process error
At least one service of
-19 encryption system is not
found. Run Setup program.
-20 Decryption process error
User actions
Not used
Corrupted file with
digital signature
Get Primar (SA)
certificate by
Internet
Get Primar (SA)
certificate by
Internet
User try to install
the chart from not
licensed media
Corrupted file with
digital signature
Get permits from
Primar
Get new permits
from Primar
Corrupted file with
permits (enc.pmt
or permits.txt)
Not used
Renew license
Chart is too old for
used permit
System can not
open cell file
Contact MARIS
Run setup program
Contact MARIS