Targets and Radar video
Manually, press the button Acquisition and click on a radar echo. If a target is tracked the
•
system will immediately display the target icon and the speed and heading vector.
Automatically when an automatic acquisition zone in front of the ship is defined. Press the
•
button Zone and enter the different parameters defining the zone.
The targets automatically detected by the system inside the zone will be displayed as long as
they are inside the acquisition area.
REMARK
When an automatic acquisition zone is defined it's also possible to track at the same time
target outside of the zone.
To delete a target, click right button of the mouse on the target and activate the item
"Delete".
ECDIS900 acquires targets from one or two radars connected by serial line to ECDIS900. It
triggers alarm when a target enters the safety zone.
MARIS Radar kits have been installed on board. The Radar kit, connected to the transceiver,
allows displaying the Radar video on top of the chart.
203
T
R
ARGETS AND
ADAR VIDEO