Waypoint Arrival Indication And Alarm - Simrad Maris ECDIS900 Operator's Manual

Waypoint arrival indication and alarm

W
AYPOINT ARRIVAL INDICATION AND ALARM
When the ship arrives at a certain point close to the waypoint the system automatically makes
the next waypoint active.
When the ship reaches the WOP (Wheel Over Point), the current waypoint is de-activated and
the ship commences a turn onto the new course.
When the ship reaches the End Of Turn point, the turn is finished and the next waypoint is
activated.
Early CC Indication (no alarm, default value 3 mn)
CC Indication (no alarm, default value 30 s)
Course Change Alarm: Alarm is triggered.
In case Alarm is not acknowledged, Back up navigator alarm is generated after 30 seconds:
it's a suspicion that something has happened with him and ship is out of control
Then alarm is triggered to make sound in other rooms of the ship to inform navigators out
watch that something is wrong on the bridge. (refer to TCS regulation)
End of Track alarm: this alarm is triggered when last Waypoint is reached. The route is
deactivated then.
165