S57 Manual Update Editor - Simrad Maris ECDIS900 Operator's Manual

S57 Manual update Editor

Select the line / area, move the mouse at the desired location on the line / area and press the
keyboard key I.
D
ELETE A POINT IN A LINE OR AN AREA
Click right button on the line / area on the point and activate the item 'Delete Point'.
Another method:
Select the line or the area, move the cursor on the point and press the keyboard key D.
C
UT A LINE IN TWO
Click right button on the line / area on the point and activate the item 'Cut Point'.
Another method:
Select the line or the area, move the cursor on the point and press the keyboard key C.
C
LOSE A LINE
Activating the item Close Polyline from the menu Edit on a selected line transforms the
polyline in a surface.
C
ONNECT TWO POLYLINES
Select two polylines and activate the item Connect two polylines from the menu Edit to join
the two lines.
The ECDIS supports the automatic updating of S 57 data as described above but also allows
the data to be manually corrected. The change can be visualised and do not restrict the ability
of automatic updating.
There are three different ways of changing objects by manual updating:
Deleting and annotating objects
•
Modifying objects
•
Inserting objects
•
All manual updates applied in the cell are stored in a log file and can be review on request.
In ECDIS the modification of objects is limited to adding text information or moving objects.
The latter is implemented as deleting the object and afterwards inserting a copy.
The ECDIS provides functions to cancel or withdraw manual updates and to query objects,
which have been inserted by manual updates.
A manual update always has effect on only one particular cell. This cell has to be assigned to
the view.
S
ELECT OBJECTS
Click on the object with the right button and activate the menu Manual Update.
The selected object is highlighted in the chart.
Select the type of object to be selected under the click: point or line / area.
240
S57 M
ANUAL UPDATE
E
DITOR