Update History; Cancellation Update; Multi Ecdis Workstations In Lan - Simrad Maris ECDIS900 Operator's Manual

Update history

I
CONS DISPLAYED IN FRONT OF THE UPDATE NAME
Green circle in front of the update shows that information about this update is available
•
making possible to review this update.
Red icon is used when update are not available.
•
U H
PDATE ISTORY OF A
To display the update history of entire collection, press the History of updates button in the
Chart Handling dialogue. An individual cell update history is available in the ENC properties
dialog.
The following list appears:
Display the update history with information about when the updates have been applied and
which cells were updated.
Utility: "Load PL test edition".
The test edition of the Presentation Library allows checking the monitor colour performance
with the test data set called ECDIS Chart1. See Technical Manual .
The possible errors, which may occur during the update are listed below.
When an ENC chart is replaced by another chart a special update file is included in the
updates. After update of the ENC chart database the old chart is automatically removed from
the collection.
When ENC (or ARCS) chart installation and update is one workstation ECDIS gives the
possibility to copy the updated database over the network making automatic the update of
all ENC databases of installed together with ECDIS on the LAN.
Proceed as follow:
Install and/or update ENC database on the planning station
•
In Chart handling dialogue press the button Copy database
•
The list of remote PC running ECDIS and connected to the LAN is listed in the dialogue
•
Select the PC(s) on which the ENC should be copied and press Copy Database
•
95
U
PDATE HISTORY
C
OLLECTION
C
ANCELLATION UPDATE
M ECDIS
ULTI WORKSTATIONS IN
LAN