Modifying A Route - Simrad Maris ECDIS900 Operator's Manual

Modifying a route

C
HANGE SCALE
At any time during the route creation process, it is possible to zoom (in or out) or to change
the scale of the chart by clicking right anywhere on the chart and selecting the desired scale.
It is also possible to use the hotkeys F1 and F2 to zoom in and out.
Remark: the scale menu depends on the type of chart in use.
L
OAD ANOTHER RASTER CHART
When the waypoint is outside the current raster chart, move the cursor outside the chart in
direction of the waypoint and click once: the raster chart below the cursor will automatically
load and be displayed. The plotting can then continue on the newly loaded chart.
To display another raster chart with a smaller scale, press the "-" key and the chart will load
automatically.
To display another raster chart with a larger scale, press the "+" key and the chart will load
automatically. ECDIS searches the database to find a chart with a larger scale displaying the
screen area of the current chart. If no chart is available on the hard disk the system does
nothing.
L
OAD ANOTHER TYPE OF CHART
Press F9 to switch from ARCS to ENC or to CMAP when plotting the route.
A route may be modified in several ways, but cannot be modified whilst locked or active.
137
M
ODIFYING A ROUTE