Input box
An Input Box also known as Spinner consists from an increment button, a decrement button,
and an edit control. The box is used to enter alphanumeric values.
To activate the input box, click on it. Click on the "up" button to increase the value and on the
"down" button to decrease the one, or type the value directly into the field.
Note, that in some cases values are limited so it is not allowed to input the out of range value.
Most of input boxes have default values
Parameter monitoring is performed with set of Information boxes. Usually they are located on
the side console but it is possible to take them out as a float window.
On a side console
Information is read only.
NOTE
With a Text Box the following action a performed:
Display text/numerical value
•
Enter text/numerical value
•
Edit text/numerical value
•
To enter a text, click inside the text box and type in some data.
14
I
NPUT BOX
I
NFORMATION BOX
As a float window
T
EXT BOX