Current information
M
ODIFYING A POINT
Select the point, click on the point and drag the mouse to the new location.
•
Click right button on that point, open the dialogue Properties and modify position, type
•
of point, time or log values.
D
ELETING A POINT
Click right button on the point and activate the menu Delete All Selected.
•
Select the point and press the key Del.
•
Select the point and press the Delete button .
•
TIPS:
Double click on the tool Point deletes all displayed points.
Select the Current tool .
•
Click on the chart and insert manually on the chart information about force and direction
•
of the current at the time the ship will pass that point.
D
C
I
ELETE
URRENT
NFORMATION
Click right button on the current arrow and activate the menu Delete All Selected.
•
Select the current and press the key Del.
•
Select the current and press the Delete button .
•
Select the Compass tool to measure distance and bearing between two points.
•
To erase the information on the chart double click on the button.
•
P
LOT A LINE
Select the Polyline tool .
•
A double click ends the line.
•
227
C
URRENT INFORMATION
R
ANGE AND BEARING CALCULATION
P
OLYLINE