Route Plan; Ew Log Book Record; Ogbook; Et Target - Simrad Maris ECDIS900 Operator's Manual

Route plan

Click on the Active Route plan button
active route.
REMARKS
If the uploaded route is not active the route plan is opened in the Create new route mode.
H
OT KEY
Press the F6 hot key to access the route plan of loaded routes. Press several times to change
the selected route.
For a detailed overview of the Route planning window, see Chapter Route.
To enter a new record in the log book click on the New Logbook record icon
For a detailed overview of this procedure, see Chapter Logbook -
Click on the Log Book Window button
entries of the active logbook.
It will now be possible to change the settings, print the logbook, load an historical book and
replay it.
For a detailed overview of the Log book window, see Chapter Logbook.
To plot a manual target click on the Set target icon
For further details about manual targets, see Chapter Radar
To display the target list click on Target List button
Double clicking on the target name centres the chart on the target.
•
Clicking on the title sorts out the targets.
•
ECDIS900 acquires targets via serial line from ARPA radar connected to the system or using
MARIS' radar interface kit. In addition ECDIS receives by serial line the targets from AIS when
AIS is interfaced to ECDIS.
C
ENTRE THE CHART AND ACCESS
Double click on the target name to centre the chart on the target.
•
32
Right click on the target's name to access to the properties.
•
R
OUTE PLAN
to display the Route planning window of the
N

EW LOG BOOK RECORD

L

OGBOOK

to display the logbook window and list the
S

ET TARGET

T

ARGET LIST

P
ROPERTIES
Event
.
-Manual Target.
.
.