Change Type Of Leg; Set A New Turning Radius; Set Xtd; Set Sog - Simrad Maris ECDIS900 Operator's Manual

Change type of leg

The longitude modification is performed by the same way. Click ion the longitude value in the
list and input the proper longitude.
A leg is defined by two waypoints and the leg type is stored in the properties of the first
waypoint.
Click on the leg type value RL (Rhumb Line) to change to GC (Great Circle) and vice versa.
Click on the Turning Radius for the chosen leg and enter the new value in the pop-up
dialogue box
The Turning Radius value may also be entered in the Waypoint Properties dialogue box.
IMPORTANT
When the Turning radius is changed the ROT is also changed according to the
selected speed and vice versa.
IMPORTANT
To change the turning radius value for all legs click in the title Radius.
Use the same procedure as for Set new turning radius.
By default the XTD value is entered in the Option dialogue panel Route.
IMPORTANT
Click in the title XTD to modify XTD for all legs.
Use the same procedure as for Set new turning radius.
By default the SOG value is entered in the Route Properties dialogue box.
IMPORTANT
Click the title SOG to modify SOG for all legs.
146
C
HANGE TYPE OF LEG
S
ET A NEW TURNING RADIUS
S XTD
ET
S SOG
ET