Simrad Maris ECDIS900 Operator's Manual page 218

Selection
Use the tool "Select OE objects"
O
THER METHODS TO SELECT OBJECTS
Select a single object: click on the object.
•
Select two or more objects (Selection containing several objects): click on each object
•
whilst keeping the <Shift> key pressed.
Activate the menu Select All Object Editor from the menu Edit.
•
Activate the menu Select All Navigation Editor from the menu Edit.
•
Activate the menu Select All Alarms objects from the menu Edit.
•
IMPORTANT
selection and locked layer
When an OE object resides in a locked OE layer, that particular object is not selectable. For
more information about layers see chapter OE - Layers.
M
OVE THE SELECTION
Move the cursor over one of the selected points and when the cursor changes to
•
the hand shape, drag the whole selection to the desired position.
When the cursor changes to the large arrow only the selected point will be
•
moved.
D
ELETE THE SELECTION
Select the object(s) and push the delete button
O
THER METHODS OF DELETING THE SELECTION
Press the Delete key.
•
Select 'Cut 'from the Edit menu.
•
Select 'Delete all selected' from the Edit menu.
•
218
to select OE objects.
: