Parallel Line - Simrad Maris ECDIS900 Operator's Manual

Parallel line

M
ODIFYING A LINE
Select the line and either move the entire line or a point of that line
when the cursor has a hand shape the line is selected and moved according to the mouse
•
movements.
otherwise the point is dragged
•
Change by keyboard the co-ordinates of one point of the line by clicking right button on the
point and selecting Absolute Coord.
Add a point by clicking right button at the desired location on the line and activating the
item 'Insert a point'. Other method: select the line, move the mouse at the desired location on
the line and press the keyboard key I.
Delete a point by selecting the line, clicking right button on the point of the line and
activating the item 'Delete point'. Other method: select the line, move the cursor on the
desired point of the line and press the keyboard key D.
Split the line in two lines by selecting the line, clicking right button on the point of the line
and activating the item 'Cut point'. Other method: select the line, move the cursor on the
desired point of the line and press the keyboard key C.
D
ELETING A POLYLINE
See paragraph Delete an
Press the Parallel line button.
Select a bearing line: the button Parallel line is then activated.
Select the tool, click and drag the mouse to define the length of the parallel line (control the
distance from the selected line with the distance information drawn on the chart).
228
ARC.
P
ARALLEL LINE