Show /Hide Past Track; How Hide Ais Targets Name; Ave The Track; Ais Target Properties - Simrad Maris ECDIS900 Operator's Manual

Show/hide AIS target's name
Check box to activate alarm
•
Set the value of the range
•
REMARK
When Alarm is active, lost targets are not remove automatically from the list after normal
timeout (1mn). Alarm acknowledgment will remove lost targets from the list.
To display or hide a target's name, click right on the target icon and select Show name or Hide
name on the pop-up menu.
REMARK
The user may also select to hide or show the name from the target's properties dialogue.
All AIS tracks are automatically recorded in memory (Up to 3 hours).
To display or hide a track click right on the target icon and select Show past track or Hide
past track in the pop-up menu.
REMARK
The user may also select to hide or show the track from the target's properties dialogue.
To store a target's track in the route / track database on the hard disk, click right on the target
icon and select Save track from the pop-up menu. The track is recorded for 3 hours with 30s
time stamp.
The saved AIS tracks are stored in the same database as the own ship and saved ARPA tracks.
To load/Unload a recorded target track see chapter Track.
To view the properties of a target click right on the target and select Properties from the pop-
up menu.
It is also possible to view to the properties from the target list dialogue by right clicking on
the name of the target.
The General panel displays static information about the target and the Navigation panel
displays information about the voyage and the dynamic data.
189
S / AIS
HOW HIDE TARGET
S /H
HOW IDE PAST TRACK
S

AVE THE TRACK

AIS
TARGET PROPERTIES
'
S NAME