Change Active Waypoint; Alarms; Route Monitoring Plan - Simrad Maris ECDIS900 Operator's Manual

Change active waypoint

The active waypoint is selected automatically when the ship arrives at the waypoint. But at
any time the current waypoint can be changed manually.
There are two ways to select another active waypoint:
Click right on the waypoint to be activated and select Activate in the pop-up menu.
•
In the route plan, click right button on the name of the waypoint and select Activate.
•
When the XTD or Waypoint arrival alarms are active the ECDIS900 will trigger an alarm each
time the alarm parameters are met.
S R
ETTING OUTE ALARM PARAMETERS
In the Ship Properties
•
In Waypoint Properties
•
In O ptions/Route, the Waypoint arrival indication and alarm distances are preset.
•
When the active route is locked it cannot be edited. The user can only change the planned
speed for the remaining legs.
The active waypoint line is displayed in red, the selected waypoint line in blue.
To modify the route it is necessary to deactivate the route and then unlock it before editing.
D
ISTANCE TO GO
The Distance To Go in the console is measured from the ship to the last waypoint.
166
C
HANGE ACTIVE WAYPOINT
dialogue, under the Alarms tab tick the boxes to activate the XTD alarm.
set the appropriate XTD parameters.
R
OUTE MONITORING PLAN

ALARMS