Arc - Simrad Maris ECDIS900 Operator's Manual

Arc

Either click left button on the line.
•
Either select the tool Selection with the left button of the mouse, click on the chart and
•
drag the mouse: all NE objects included inside the rectangle are selected.
Deleting a bearing line
Click right button on the line and activate the menu Delete All Selected.
•
Select the line and press the key Del.
•
Select the line and press the Delete button.
•
P
LOTTING AN ARC
Press the Arc button, the cursor on the chart changes.
•
Click to plot the centre of the arc, drag the mouse and click one time: the origin point of
•
the arc is plotted. Move the mouse in the appropriate direction and click a second time to
define the arc extremity.
M
ODIFYING AN ARC
Select the arc, click on the centre and drag the mouse: the centre and the arc are
•
translated.
Select the arc, click on one of the arc points and drag the mouse: the arc is modified in
•
range and angle.
Click right button on the arc, access the menu Properties and modify position, radius, start
•
or end angle
Click right button on the centre, access the menu Absolute Coord and change the
•
position of the point.
225
A
RC