Waypoint Properties - Simrad Maris ECDIS900 Operator's Manual

Waypoint properties

The direction of the route will now be reversed and an arrow displayed on each leg shows
•
the direction of the route.
NOTE The Reverse function also re-numbers the waypoints.
L /U
OCK NLOCK A ROUTE
Locate the cursor on a route leg, right click right and select Lock on the pop-up menu.
•
Locking and Unlocking the route is also possible in the
•
The route will now be protected from unauthorized alterations.
Keyboard modifications in the Route plan window are also impossible when the
NOTE
route is locked.
U
NDO
Undo function is applicable only for route modification. All modifications made to a route
•
can be undone except for the function "Split the route". Press several times to undo
several modifications made to the route.
Access "Undo" by right clicking on the route and selecting the "Undo" from the pop-up
•
menu.
IMPORTANT
when the function Undo is activated several times the modifications made to
the selected route will be cancelled one by one.
Locate the cursor on a waypoint, right click and select Properties from the pop-up menu.
Alternatively move the cursor over the waypoint and press F4 several times to access the
waypoint Properties dialogue.
The properties dialogue displays two tabs: General and Information
139
W
AYPOINT PROPERTIES
Route Plan and in Route Properties.