Zooming - Simrad Maris ECDIS900 Operator's Manual

Zooming

The colour of the icon displayed in front of each chart indicates the chart permit status:
Green – the chart permit is valid.
•
Yellow – permit warning. The chart permit must be updated.
•
Red – the chart permit is not valid.
•
To select a chart to be loaded either:
Click on the chart number and click Load Chart.
•
Double click on the chart number.
•
To list all available ARCS charts Toggle off the check box Select chart including current
point.
In order to facilitate the speedy selection of charts the contents of the columns in
the Chart Handling window may be sorted, either in ascending or descending
NOTE
order, by clicking on the column heading. Alternate clicks will change the sort
sequence.
B H
Y OT KEY
Press F9 to select another type of chart. If ARCS is selected, the chart with the best scale and
centred in the middle of the current screen will be loaded automatically.
REMARK:
To customize the way chart types are switched press the keys Ctrl + F9 to access to
the set up dialogue and select the chart to be used.
S
WITCHING FROM CHART HANDLING DIALOGUE
Double click on the chart number to load the ARCS chart directly from the Chart Handling
dialogue.
ARCS charts are produced in their original scale, such as 1:50,000.
The ECDIS900 will always open a chart at its surveyed scale. (Original scale).
62
Z
OOMING