Simrad Maris ECDIS900 Operator's Manual page 36

Option Console
It is possible to predefine several configurations of the console layout in order to use an
appropriate layout according to the current type of work. For example a configuration can be
defined for route monitoring displaying only active waypoint, drift and target information
and another one for docking including Ship's parameters, drift and cursor position.
C
REATE A CONFIGURATION
Two configurations called Default and Approval are installed by default. To create a new one
proceed as follow:
Press the New button
•
Enter a name
•
Select in the list on the left side the panels to be displayed
•
Adjust the size, type and colours of the font
•
Click OK
•
Adjust eventually the position of the panels directly in the console area by clicking and
•
dragging them at the proper place
REMARK
If the panel is dragged outside of the console area it is displayed as a floating window.
T
RANSPARENCY FLOATING CONTROL OPTION
Select the option to display the panel with transparency on the chart.
L
OCK A CONFIGURATION
Once the configuration is properly defined, check on the box "Freeze Configuration" to avoid
unwanted changes.
L
OAD A CONFIGURATION
The configuration pop up menu gives access to the different configuration defined in the
system.
36