Radar; Radar Overview; Target Display - Simrad Maris ECDIS900 Operator's Manual

Radar Overview

Radar

I
NTERFACE
There are two ways for the ECDIS900 to interface with radar:
Connection to the ARPA radar via serial line.
•
Connection directly to the radar transceiver with the MARIS' radar kit that delivers the
•
radar target table and the radar video.
All acquired targets are displayed on the electronic chart and the ECDIS900 manages the CPA
/ TCPA alarms.
T
ARGETS
The targets are displayed on the chart with
the past track can be displayed, the
case of manual target. The
the target list contains the list of tracked targets.
The prediction tool allows calculating the future position of the targets.
R
EMOVE TARGET INFORMATION
The target icons can be removed from the display by pressing the hot key F8.
R A
ADAR NTENNA POSITION
The Ship's parameters dialogue, the
Radar antenna.
IMPORTANT
The targets' positions are calculated from this reference point.
MARIS R K
ADAR IT
By using MARIS PC radar
Combined this with ECDIS900, the radar picture can be shown on the chart and by means of
the built-in radar tracker you will now have the most common ARPA functions available.
The system to be installed on one or two machines which may operate on a local network
onboard the ship. MARIS radar tracking system has a unique capacity of tracking
simultaneously up to 300 targets, making it capable of searching for and showing data much
faster than any other system.
Target symbols are small circles with a speed vector, the vector length being dependent on
the speed of the target.
In case of CPA/TCPA alarms the target's icon flashes.
195
R O
ADAR
special
track can be saved
target Properties display all information about the actual target and
Shape tab, allows the user to set the exact position of the
kit, the PC can be transformed into an advanced radar system.
T
ARGET
VERVIEW
symbols. On request the
on the hard disk and the target deleted in
D
ISPLAY
name of the target and