Modifying An Existing Profile - Polycom RMX 1500 Administrator's Manual

Modifying an Existing Profile

22 Define the following parameters:
Table 1-8 Profile Properties - Network Services
Parameter
IP Network Services:
Service Name
SIP Registration
Accept Calls
23 Click OK to complete the Profile definition.
A new Profile is created and added to the Conference Profiles list.
You can modify any of the Profile's parameters but you cannot rename
the Profile.
To modify the Profile Properties:
1
In the Conference Profiles list, double -click the Profile icon or right-
click the Profile icon, and then click Profile Properties.
The Profile Properties - General dialog box opens.
Polycom RMX 1500/2000/4000 Administrator's Guide
Description
This column lists all the defined Network Services,
one or several depending on the system
configuration.
To register the conferencing entity to which this
profile is assigned with the SIP Server of the
selected Network Service, click the check box of that
Network Service in this column.
To prevent dial in participants from connecting to a
conferencing entity when connecting via a Network
Service, clear the check box of the Network Service
from which calls cannot connect to the conference.
1-35