Modifying A Profile; Deleting A Profile; Setting A Default Profile - Polycom RMX 1000 User Manual

Figure 4-8
The table below explains the configuration parameters.
Table 4-6
Parameter
Enable Recording
Start
Audio Only

Modifying a Profile

To modify a saved profile, right-click it in the Profile list, and then click
Profile Properties to modify its properties. For explanation of the
configuration parameters, see Defining a Profile.

Deleting a Profile

To delete a profile, select it in the Profile list, and then click
right-click the desired profile and then click Delete Profile.

Setting a Default Profile

After a default profile is set, endpoints will use it when creating a conference
from the lobby. In addition, when users create a meeting room, reserve a
conference, or convene an instant conference via the Web interface, the
Recording Parameter Setup Interface
Conference Recording Configuration
Description
If an RSS 2000 is available on your network, you can select
this option to enable the recording function.
Select the start time of the conference recording:
If this option is selected, only the conference audio will be
recorded.
•
The recording parameters can be set here only after the IP address of the RSS
2000 is configured on the Recording Link interface. For how to set Recording Link,
see Recording Link.
•
The recording link occupies one conference resource.
A profile in use cannot be modified or deleted.
Immediately – The recording automatically starts
immediately after the first participant joins the conference.
Upon Request – The operator or chairperson starts the
recording manually. After this option is selected, the
recording can be manually started through the Web interface
or DTMF function. For more information, see Recording
Control.
Polycom RMX 1000 User Guide
; Alternatively,
4-9