Sharpness / Motion Resolution Slider Panes - Polycom RMX 1500 Administrator's Manual

Hide thumbs Also See for RMX 1500:

Table of Contents

Chapter 2-Additional Conferencing Information

Sharpness / Motion Resolution Slider Panes

Sharpness and Motion are Video Quality settings that are selected per

conference and are defined in the conference Profile and they determine

the resolution matrix that will be applied globally to all conferences

according to the selection of Sharpness or Motion. The resolution matrix for

Sharpness or Motion is determined by the resolution configuration and can

be viewed in the Resolution Configuration sliders.

System Resource usage is affected by the Resolution Configuration settings.

As shown in following diagram:

Moving the HD720p30 resolution slider from 1024kbps to 1920kbps

increases the minimum connection threshold line rate for that

resolution. Endpoints connecting at line rates between 1024kbps and

1920kbps that would have connected at

HD 720p30 resolution will instead connect at SD 30 resolution. Each

of the affected endpoints will connect at lower resolution but will use

1.5 system resources instead of 3 system resources.

Moving the HD1080p30 resolution slider from 4096kbps to 2560kbps

decreases the minimum connection threshold line rate for that

resolution. Endpoints connecting at line rates between 2560kbps and

4096kbps that would have connected at

HD 720p30 resolution will instead connect at HD 1080p30 resolution.

Each of the affected endpoints will connect at higher resolution but

will use 6 system resources instead of 3 system resources.

Rmx 4000 Rmx 2000