Activex Bypass - Polycom RMX 1500 Administrator's Manual

Hide thumbs Also See for RMX 1500:

Table of Contents

Chapter 19-RMX Administration and Utilities

ActiveX Bypass

Installing ActiveX

At sites that, for security reasons, do not permit Microsoft® ActiveX®

to be installed, the MSI (Windows Installer File) utility can be used to

install .NET Framework and .NET Security Settings components on

workstations throughout the network.

All workstation that connect to RMX systems must have both .NET

Framework and .NET Security Settings running locally. These

components are used for communication with the RMX and can only

be installed on workstations by users with administrator privileges.

The MSI utility requires the IP addresses of all the RMX systems

(both control unit and Shelf Management IP addresses) that each

workstation is to connect to.

If the IP address of the any of the target RMXs is changed, the

ActiveX components must be reinstalled.

To install ActiveX components on all workstations in the network:

Download the MSI file EMA.ClassLoaderInstaller.msi from the

Polycom Resource Center.

The MSI file contains installation scripts for both .NET Framework

and .NET Security Settings.

Create a text file to be used during the installation containing the IP

addresses of all the RMX systems (both control unit and Shelf

Management IP addresses) that each workstation in the network is to

The file must be named url_list.txt and must be saved in the same

folder as the downloaded MSI file.

Rmx 4000 Rmx 2000