Cp Conferencing With H.263 4Cif - Polycom RMX 1500 Administrator's Manual

Chapter 2-Additional Conferencing Information

CP Conferencing with H.263 4CIF

2-8
Depending on the type of Media card(s) installed, the Maximum CP
Resolution of the RMX can be set to one of the following resolutions:
MPM Cards
HD 720p30
SD 30
SD 15
CIF 30
For information about setting system flags, see "Resolution Configuration"
on page 2-15.
The video resolution of 4CIF in H.263 endpoints is only supported for
conferences in which the video quality is set to sharpness and for line
rates of 384 Kbps to 1920 Kbps as shown in Table 2-2.
Table 2-2 Video Quality vs. Line Rate
Endpoint
Line Rate
Kbps
Resolution
128 QCIF
256 CIF
384 - 1920+ CIF
The RMX Web Client supports monitoring of H.263 4CIF information. The
H.245 or SDP tab includes the additional information.
The creation of a new H.263 4CIF slide is supported in the IVR Service in
addition to the current H.263 IVR slide. If users utilize the default
Polycom slides that are delivered with RMX 1500/2000/4000, the slide's
resolution will be as defined in the profile, i.e. SD, HD, CIF, etc.
For more information see "High Resolution Slides".
MPM+ / MPMx Cards
HD 1080p30
HD 720p30
SD 30
CIF 30
Video Quality
Motion
Frame
Rate
30
30
30
Sharpness
Frame
Resolution
Rate
CIF 30
CIF 30
4CIF 15