Polycom RMX 1500 Administrator's Manual page 518

14-80
11 Optional. Click the Ports tab.
Settings in the Ports tab allow specific ports in the firewall to be
allocated to multimedia conference calls. If required, defined the
ports to be used multimedia conference calls handled by this
Network Service. The field definitions of the Ports tab are the same as
for the Default IP Network Service.
For more information see the RMX 1500/2000/4000 Administrator's
Guide, "Click the Ports tab." on page 14-20.
12 If required, click the QoS tab.
RMX's implementation of QoS is defined per Network Service, not
per endpoint.
The routers must support QoS in order for IP packets to get higher priority.
The field definitions of the QoS tab are the same as for the Default IP
Network Service. For more information see the RMX 1500/2000/4000
Administrator's Guide, "If required, click the QoS tab." on page 14-22.
13 Click the SIP Servers tab.
14 Define the Primary and Alternate SIP Server for this network Service.
•
Starting with Version 7.1, Registration of conferencing entities with the SIP
Servers was moved to the conferencing entities and is defined in the
Conference Profile.
•
If Microsoft Office Communications or Lync server are part of this network
service, a certificate must be created for this network service. If each
network connected to the RMX includes Microsoft Office Communications
or Lync server, separate certificates must be created and sent to the MCU
for each of these networks.
•
If the Network Service does not include a DNS, you must use the IP address
of the SIP Server instead of its name.
The field definitions of the SIP Servers tab are the same as for the
Default IP Network Service. For more information see the RMX 1500/
2000/4000 Administrator's Guide, "Click the SIP Servers tab." on
page 14-25.
Chapter 14-Network Services