Setting A Network Service As Default - Polycom RMX 1500 Administrator's Manual

15 Click the Security tab.
The field definitions of the Security tab are the same as for the Default
IP Network Service. For more information see the RMX 1500/2000/
4000 Administrator's Guide, "Click the Security tab." on page 14-28.
16 Optional. To configure the ICE environment, click the SIP Advanced
tab.
17 Modify the following fields:
Table 14-34 Default IP Network Service – SIP Advanced
Field
Server User Name
ICE Environment
18 Click the OK button.
The new Network Service is added to the IP Network Services list
pane.

Setting a Network Service as Default

The default Network Service is used when no Network Service is selected
for the following:
• Dial out participants
• Reserving resources for participants when starting an ongoing
conference
• Gateway calls
In addition, the Signaling Host IP address and the MCU Prefix in GK
displayed on the RMX Web Client main screen are taken from the default
H.323 Network Service.
Polycom RMX 1500/2000/4000 Administrator's Guide
Description
Enter the User name for this service as defined in
the Active Directory. For example, enter rmxNet2.
This field is disabled if the ICE Environment field is
set to None.
Select MS (for Microsoft ICE implementation) to
enable the ICE integration.
This field is disabled if the RMX is not running in
MPM+ Card Configuration Mode.
14-81