Enabling The Recording In The Conference Profile - Polycom RMX 1500 Administrator's Manual

Chapter 12-Recording Conferences

Enabling the Recording in the Conference Profile

12-6
5
Select the Recording Failed message, and then select the appropriate
message file (by default, Recording_Failed.wav) from the file list to
the right of the field.
6
To modify the default DTMF codes, click the DTMF Codes tab.
7 To modify the DTMF code or permission for a recording function:
a
Select the desired DTMF name (Start, Stop or Pause Recording),
click the DTMF code entry and type a new code.
Table 12-2
Recording Operation
Start or Resume Recording
Stop Recording
Pause Recording
b In the Permission entry, select whether this function can be used
by all conference participants or only the chairperson.
8
Click OK.
To be able to record a conference, the recording options must be enabled
in the Conference Profile assigned to it. You can add recording to existing
Profiles by modifying them.
To enable recording for a conference:
1
In the RMX Management pane, click the Conference Profiles (
button.
The Conference Profiles list is displayed.
2
Create a new profile by clicking the New Profile (
modify an existing profile by double-clicking or right-clicking an
existing profile and then selecting Profile Properties.
If creating a new profile, complete the conference definition. For more
information on creating Profiles see the RMX Administrators Guide, Defining
Profiles on page 1-9.
Default DTMF Codes assigned to the recording process
DTMF Code
*3
*2
*1
Permission
Chairperson
Chairperson
Chairperson
)
) button or