Chapter 19-RMX Administration and Utilities
System Configuration
Modifying System Flags
19-6
The system's overall behavior can be configured by modifying the default
values of the System Flags.
For flag changes to take effect, the MCU must be reset. For more information,
see Chapter 19, "Resetting the RMX" on page 19-132.
To modify system flags:
1
On the RMX menu, click Setup > System Configuration.
The System Flags dialog box opens.
2
In the
MCMS_PARAMETERS tab, the
Table 19-2
System Flags – MCMS_PARAMETERS
Flag
ALLOW_NON_
ENCRYPT_PARTY_IN_
ENCRYPT_CONF
following flags can be modified:
Description
If YES, allows non-encrypted participants to
connect to encrypted conferences.
Default: No