Polycom RMX 1500 Administrator's Manual page 235

Default Entry Queue properties
The system is shipped with a default Entry Queue whose properties are:
Table 5-1 Default Entry Queue Properties
Parameter
Display Name
Routing Name
ID
Profile name
Entry Queue
Service
Ad Hoc
Cascade
Enable ISDN/
PSTN Access
Polycom RMX 1500/2000/4000 Administrator's Guide
Value
DefaultEQ
The user can change the name if required.
DefaultEQ
The default Routing Name cannot be changed.
1000
Factory-Video-Profile. Profile Bit Rate is set to 384 Kbps.
Entry Queue IVR Service. This is default Entry Queue IVR
Service shipped with the system and includes default
voice messages and prompts in English.
Enabled
None (Disabled)
Disabled. You can modify the properties of this Entry
Queue to enable ISDN/PSTN participants to dial-in to a
conference. Up to two dial-in numbers can be assigned.
5-3