Move Guidelines - Polycom RMX 1500 Administrator's Manual

Encryption Flag Settings

Move Guidelines

• When participants are moved to another conference their encryption
settings are evaluated to determine if the move is permitted. If not,
the move fails and the participants remain in their original conference.
• When the flag is set to
that have different encryption settings. For example, encrypted
participants can move to encrypted and non-encrypted conferences.
• When the flag is set to
match the conference encryption setting to be moved to the other
conference. For example, encrypted participants can move only from
an encrypted conference to another encrypted conference.
To modify the Encryption flag:
1
Click Setup>System Configuration.
The System Flags dialog box opens.
2
Set the ALLOW_NON_ENCRYPT_PARTY_IN_ENCRYPT_CONF
flag to YES or NO.
3
Click OK.
For more information, see "System Configuration" on page 19-6.
Reset the MCU for flag changes to take effect.
>>
Polycom RMX 1500/2000/4000 Administrator's Guide
, participants can move between conferences
YES
, the participant's encryption setting must
NO
2-71