Enabling Hot Backup - Polycom RMX 1500 Administrator's Manual

Chapter 19-RMX Administration and Utilities

Enabling Hot Backup

19-100
To enable Hot Backup:
1
On the RMX menu, click Setup > Hot Backup.
The RMX Hot Backup dialog box is displayed.
2
Complete or modify the following fields:
Table 19-20 Hot Backup
Field
Hot Backup
Enabled
MCU Role:
Paired MCU IP
Address
Description
Select this check box to enable Hot Backup.
This setting determines the role of the MCU in the Hot
Backup configuration.
Select either Master MCU or Slave MCU from the
drop-down menu.
Enter the Control Unit IP Address of the:
•
Slave MCU (if this MCU is the Master)
•
Master MCU (if this MCU is the Slave)