MCU Configuration to Communicate with an External
Database Application
To enable the communication with the external database application,
several flags must be set in the System Configuration.
To set the System Configuration flags:
1
On the Setup menu, click System Configuration.
The System Flags dialog box opens.
2
Modify the values of the following flags:
Table D-1
Flag Values for Accessing External Database Application
Flag
ENABLE_EXTERNAL_
DB_ACCESS
EXTERNAL_DB_IP
Polycom RMX 1500/2000/4000 Administrator's Guide
Description and Value
The flag that enables the use of the external
database application.
The IP address of the external database
application server. default IP: 0.0.0.0.
D-13