Guidelines - Polycom RMX 1500 Administrator's Manual

Chapter 2-Additional Conferencing Information
2-16
The Resolution Configuration dialog box enables the RMX administrator to
override the default video resolution decision matrix, effectively creating
his/her own decision matrix. The minimum threshold line rates at which
endpoints are connected at the various video resolutions can be optimized
by adjusting the resolution sliders.
System resource usage is also affected by the Resolution Configuration
settings. For more information see "Video Resource Usage" on page
"Default Minimum Threshold Line Rates" on page 2-5.

Guidelines

• Resolution Slider settings affect all Continuous Presence (CP)
conferences running on the RMX. Video Switched conferences are not
affected.
On the RMX1500 MPMx-Q assembly, the use of HD with Continuous Presence
requires an additional license. In the Resource Report and Resolution
Configuration panes, HD settings are displayed but are not enabled and if HD is
selected the system will enable SD by default.
• A system restart is not needed after changing the Resolution Slider
settings.
• Resolution Slider settings cannot be changed if there are ongoing
conferences running on the RMX.
• The displayed sliders and the resolutions change according the Card
Configuration Mode: MPM, MPM+ or MPMx.
From Version 7.1, MPM media cards are not supported.
Accessing the Resolution Configuration dialog box
The Resolution Configuration dialog box is accessed by clicking Setup >
Resolution Configuration in the RMX Setup menu.
The Resolution Configuration dialog box display changes according to the
Card Configuration Mode:
• MPM and MPM+
• MPMx - supports H.264 High Profile
2-5 and