Conference Level
•
The Telepresence Mode and Telepresence Layout Mode fields are only
displayed in the Conference Profile dialog box if the RMX has a
Telepresence license installed.
•
A Telepresence conference must have Telepresence Mode enabled in its
profile.
•
In Telepresence Mode, ITP sites are automatically detected.
•
When Telepresence mode is selected in a conference profile, the
following options are disabled:
— borders
— site names
— speaker indication
— skins
— same layout
— presentation mode
— auto layout
— lecture mode
•
The master (center) camera is used for video, audio and content.
•
Conference Templates can be used to simplify the setting up
Telepresence conferences where precise participant layout and video
forcing settings are crucial. Conference Templates:
— Save the conference Profile.
— Save all participant parameters including their Personal Layout
and Video Forcing settings.
•
An ongoing Telepresence conference can be saved to a Conference
Template for later re-use.
For more information see "Conference Templates" on page 9-1.
Room (Participant/Endpoint) Level
•
To the RMX, each camera in a Telepresence room is considered to be an
endpoint and is configured as a participant.
•
The Telepresence Mode field is always displayed in the New Participant
dialog box. If the system is not licensed for Telepresence this field is
automatically set to None.
•
Telepresence participants (endpoints) must be specified as:
— RPX – transmitting 4:3 video
Polycom RMX 1500/2000/4000 Administrator's Guide
2-81