Polycom RMX 1500 Administrator's Manual page 537

4
Click the Add Language button.
The New Language dialog box opens.
5 In the New Language box, enter the name of the new language. The
language name can be typed in Unicode and cannot start with a digit.
Maximum field length is 31 characters.
6 Click OK.
The new language is added to the list of Supported Languages.
To upload messages to the MCU:
You can upload audio files for the new language or additional files for an
existing language now, or you can do it during the definition of the IVR
Service. In the latter case, you can skip the next steps
• Voice messages should not exceed 3 minutes.
•
It is not recommended to upload more than 1000 audio files to the MCU
memory.
1
To upload the files to the MCU, in the Supported Languages dialog box,
click the Add Message File button.
2 The Add Message File dialog box opens.
Polycom RMX 1500/2000/4000 Administrator's Guide
.
15-5