Installing Rmx Manager For Secure Communication Mode - Polycom RMX 1500 Administrator's Manual

Chapter 18-RMX Manager Application
Installing RMX Manager for Secure
Communication Mode
18-32
The RMX Manager cannot be downloaded from a site, operating in Secure
Communication Mode, without a valid TLS certificate.
The following procedure describes how to obtain a TLS certificate and
download the RMX Manager from a site operating in Secure
Communication Mode.
FIPS is always enabled in Ultra Secure Mode, and when ClickOnce is used to
install RMX Manager, the workstation must have one of the following installed:
• .NET Framework 3.5 or a later version of the .NET Framework.
•
.NET Framework 2.0 plus Service Pack 1 or later.
To install the RMX Manager:
1
Set the RMX to Non Secure Communication Mode
a
In the RMX Management pane, click IP Network Services.
b
In the IP Network Services list pane, double click the Management
Network entry.
The Management Network Properties dialog box is displayed.