Modifying A Profile; Deleting A Profile; Setting A Default Profile - Polycom 3150-16966-002 User Manual

Polycom conference platform user guide
Table of Contents

Advertisement

Chapter 4 – Conference Profiles
Table 4-14
Parameter
Video Clarity
Lost Packet
Recovery
Echo Suppression
Keyboard Noise
Suppression

Modifying a Profile

To modify a saved profile, right-click in the Profile list, and then click Profile
Properties to modify its properties.

Deleting a Profile

To delete an existing profile, select it in the Profile list, and then click
Alternatively, right-click the profile to be deleted and then click Delete
Profile.

Setting a Default Profile

After a default profile is set, the endpoint will use it when creating a
conference directly through the remote control. In addition, when a user
creates a meeting room, reserves a conference or holds an instant conference
via the Web interface, the default profile will be used unless otherwise
specified.
To set a default profile, right-click the profile to be defined in the Profile list,
and then click Set as Default. After that, the icon of the profile becomes
4-14
Parameter Description of Advanced Options
Description
This option is enabled by default. It is used to improve the
clarity of video received from an endpoint which has low
bandwidth and/or low resolution.
Lost Packet Recovery (LPR) is an algorithm designed to
protect IP video calls against the impact of network packet
loss. This option is enabled by default. In case of packet loss
during network transmission, the packet recovery mechanism
will be automatically activated if the endpoint experiencing
packet loss also supports the LPR protocol. This function can
effectively improve the decreased video quality caused by
packet loss.
This option is enabled by default. It is used to prevent the
sound of near site echoing being played to the far site(s).
This option is disabled by default. It specifies whether the
system mutes audio sent to the far site when keyboard tapping
sounds are detected at the near site(s).
A profile in use cannot be modified or deleted.
A profile with the AES encryption function enabled cannot be set as the default profile.
.
.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rmx 1000

Table of Contents