Resource Report - Polycom RMX 1500 Administrator's Manual

Chapter 19-RMX Administration and Utilities

Resource Report

19-68
3
In the New Value field, clear the value entries.
4 Click OK.
Reset the MCU for changes to take effect. For more details, see the RMX
1500/2000/4000 Administrator's Guide, "Resetting the RMX" on
page 19-132
The Resource Report displays the real time resource usage according to the
selected Resource Capacity Mode:
• Flexible Resource Capacity Mode available in MPM, MPM+ and MPMx
Modes.
• Fixed Resource Capacity Mode available only in MPM+ and MPMx
Modes
On the RMX1500 MPMx-Q assembly, the use of HD with Continuous Presence
requires an additional license. In the Resource Report and Resolution
Configuration panes, HD settings are displayed but are not enabled and if HD is
selected the system will enable SD by default.
The Resource Report also includes a graphic representation of the resource
usage.
When the RMX is working in MPM+ or MPMx Mode with Fixed Resource
Capacity Mode™ selected, additional system resources information is
displayed.
Displaying the Resource Report
1
In the main toolbar, click Administration > Resource Report.