Auto Layout Configuration - Polycom RMX 1500 Administrator's Manual

Auto Layout Configuration

Table 19-4 JITC_MODE Flag Value – Effect on System Flags (Continued)
Flag
MIN_PWD
_CHANGE
_FREQUENCY
_IN_DAYS
HIDE
_CONFERENCE
_PASSWORD
Cyclic File Systems
ENABLE_CYCLIC
_FILE_SYSTEM
_ALARMS
The Auto Layout option lets the RMX automatically select the conference
video layout based on the number of participants currently connected to
the conference. You can modify the default selection of the conference
video layout to customize it to your conferencing preferences.
Customizing the Default Auto Layout
The default Auto Layout is controlled by 13 flags:
PREDEFINED_AUTO_LAYOUT_0, ... , PREDEFINED_AUTO_LAYOUT_12
Each of the 11 Auto Layout flags can be left at its default value, or set to any
of the Possible Values listed in Table 19-5.
The flag that controls the Auto Layout you wish to modify must be added
to the System Configuration file. For more information see "Modifying
System Flags" on page 19-6.
Polycom RMX 1500/2000/4000 Administrator's Guide
JITC_MODE =
YES
Range Default
1-7 1
YES/NO NO
YES/NO YES
NO
Range Default
0-7 0
YES/NO NO
YES/NO NO
19-41