Enabling The Automatic Generation Of Passwords - Polycom RMX 1500 Administrator's Manual

Chapter 19-RMX Administration and Utilities
19-48
existing passwords. Only new conferencing entities will be affected
by the change.
Do not enable this option in an environment that includes a Polycom DMA
system.

Enabling the Automatic Generation of Passwords

To enable the automatic generation of passwords, the following flags have
to be defined:
Table 19-8 Automatic Password Generation Flags
Flag
HIDE_CONFERENCE_PASSWORD
NUMERIC_CONF_PASS_MIN_LEN
Description
NO (default) - Conference and
chairperson passwords are displayed
when viewing the Conference/
Meeting Room/ Reservation
properties. It also enables the
automatic generation of passwords in
general.
Yes - Conference and Chairperson
Passwords are hidden (they are
replaced by asterisks). It also
disables the automatic generation of
passwords.
Enter the minimum number of
characters required for conference
passwords.
Possible values: 0 – 16.
0 (default in non-secured mode)
means no minimum length. However
this setting cannot be applied when
the RMX is in Enhanced Security
Mode.
9 (default in Enhanced Security
Mode) Conference password must
be at least 9 characters in length.