Polycom RMX 1500 Administrator's Manual page 696

Chapter 19-RMX Administration and Utilities
19-32
Table 19-3 Manually Added System Flags – MCMS_PARAMETERS
Flag and Value
NUMBER_OF_REDIAL
PARTY_GATHERING
_DURATION_SECONDS
PCM_FECC
PCM_LANGUAGE
REDIAL_INTERVAL_IN_
SECONDS
RMX_MANAGEMENT
_SECURITY
_PROTOCOL
Description
Enter the number re dialing attempts required.
Dialing may continue until the conference is
terminated.
Default: 3
The value of this System Flag sets the
duration, in seconds, of the display of the
Gathering slide for participants that connect to
the conference after the conference start time.
Range: 0 - 3600
Default: 15
For more information see "Video Preview" on
page 2-46.
Determines whether the DTMF Code, ##, the
Far/Arrow Keys (FECC) or both will activate
the PCM interface. This flag can be also be
used in combination with DTMF code
definitions to disable PCM.
Possible Values: YES / NO
Default: YES.
Determines the language of the PCM
interface.
Possible Values are: ENGLISH,
CHINESE_SIMPLIFIED,
CHINESE_TRADITIONAL, JAPANESE,
GERMAN, FRENCH, SPANISH, KOREAN,
PORTUGUESE, ITALIAN, RUSSIAN,
NORWEGIAN
Default: Current RMX Web Client language.
Enter the number of seconds that the RMX
should wait before successive re dialing
attempts.
Range: 0-30 (Default: 10)
Enter the protocol to be used for secure
communications.
Default: TLSV1_SSLV3 (both).
Default for U.S. Federal licenses: TLSV1.