Print Control Board (Prcb) - Konica Minolta bizhub C30P Service Manual

6. Other
6.3.12

Print control board (PRCB)

NOTE
• After the Print control board replacement, you need to set the language to be dis-
played on the control panel again.
See P.139
1. Remove the Rear Cover.
See P.43
[1]
[1]
[1]
[2]
48
[1]
[2]
A011F2C536DA
[1]
A011F2C021DA
[1]
A011F2C022DA
Field Service Ver. 2.0 May 2007
2. Loosen seven screws [1], and
remove the print control board pro-
tective shield [2].
3. Remove the print control board fan
motor.
See P.65
4. Remove the left cover.
See P.42
5. Remove seven screws [1].
6. Disconnect three connectors [1] on
the print control board.
7. Disconnect two flat cables [2] from
the print control board.