Image Transfer Section; Removal Of The Image Transfer Roller Assy; Cleaning Of The Pre-Image Transfer Lower Guide Plate; Cleaning Of The Charge Neutralizing Plate - Konica Minolta Di1611 Service Manual

Di1611/Di2011 FIELD SERVICE Ver.1.0 Mar. 2004
4.3.5

IMAGE TRANSFER SECTION

(1)

Removal of the Image Transfer Roller Assy

(2)

Cleaning of the Pre-Image Transfer Lower Guide Plate

(3)

Cleaning of the Charge Neutralizing Plate

4035D044AB
1. Remove the Image Transfer Roller Assy.
NOTES
• Indentations or dirt on the surface of the Image
Transfer Roller adversely affect the printed image.
Do not therefore touch or dirty with toner the sur-
face of the Image Transfer Roller.
• When handling the Image Transfer Roller, hold
onto the shaft or bushings of the roller.
• Do not place a new Image Transfer Roller directly
4035D042AB
on the floor.
1. Open the Right Door.
2. Using a soft cloth dampened with alcohol, wipe
the Pre-image Transfer Lower Guide Plate clean
of dirt.
4035D043AA
1. Open the Right Door.
2. Using a soft cloth dampened with alcohol, wipe
the Charge Neutralizing Plate clean of dirt.
NOTES
• Use care not to allow the Image Transfer Roller to
be touched with alcohol.
• Do not allow the soft cloth to be caught by the tip of
the Charge Neutralizing Plate.
1-23
MAINTENANCE